Electric Motors

Electric motor fitted to an Anand Gears worm gearbox

Drive Chain Starts Here

Motors, Supplied the Gearbox-Maker's Way

Motor supply is a supporting line at Anand Gears — but a deliberate one. When the same vendor sizes the motor, the gearbox, the VFD and the starter panel, the pieces arrive matched: the pole count suits the gear ratio, the frame suits the flange, and the overload relay is set to the real nameplate current, not a guess.

Crompton Greaves, Havells and LS makes

Single-phase 230 V and three-phase 415 V

Foot (B3), flange (B5) and face (B14) mounting

2 / 4 / 6-pole speeds for direct or geared drives

Engineering Data

Typical Supply Range

The sizes we handle most — larger frames, brake motors, and IE-class variants arranged against the manufacturer catalogue at quotation.

Type	Supply	Common Ratings	Speeds	Typical Use
Single-phase induction	230 V	0.37 – 2.2 kW (0.5 – 3 HP)	~1440 / 2880 rpm	Small machines on light-commercial supply
Three-phase induction	415 V	0.37 – 3.7 kW (0.5 – 5 HP) common; larger on request	2 / 4 / 6-pole	Industrial drives, gearbox and VFD duty
Special-speed & special-duty	Per application	Per catalogue	Incl. high-speed variants	Arranged case-by-case with the drive design

Exact frame sizes, efficiency classes and dimensions are confirmed from the manufacturer's official catalogue at quotation.

The Anand Gears Advantage

A Motor Is One Quarter of the Package

Fitted to Our Gearboxes

Flange-coupled to a worm or helical unit as a geared motor — one tested assembly, one warranty.

Driven by Our VFDs

Drive sized to the real motor current and load type — see VFD Drives.

Started by Our Panels

DOL or star-delta starter, or a full control panel — overloads pre-set to the nameplate.

Common Questions

Electric Motor FAQ

Which electric motor brands does Anand Gears supply?

Crompton Greaves, Havells and LS induction motors are our common supply, in single-phase (230 V) and three-phase (415 V) versions. Motor supply is a supporting line to our gearbox manufacturing — most motors we sell leave the shop bolted to one of our gearboxes or wired into one of our panels.

What ratings and mountings are typically available?

The sizes we handle most are fractional to about 3.7 kW (0.5 to 5 HP) in 2-pole (~2880 rpm), 4-pole (~1440 rpm) and 6-pole (~960 rpm) speeds, with foot (B3), flange (B5) and face (B14) mounting. Larger frames, brake motors, and higher-efficiency IE-class variants are arranged against the manufacturer's catalogue at quotation.

Can I buy the motor already fitted to a gearbox?

Yes — that is our geared motor line: the motor flange-coupled to a worm or helical gearbox, delivered as one tested unit. Add a VFD and a starter panel and the whole drive chain arrives matched — overloads set to the real motor current, ramps set to the real load.

Is Anand Gears an authorised distributor of these motor brands?

No. Anand Gears is an independent supplier and panel-builder, not an OEM or authorised distributor of any of the brands listed. Brand and model names are the property of their respective owners. Final model availability, lead-time and price are confirmed at the time of quotation, and specifications should be cross-checked against the manufacturer's official datasheet before ordering.

Brand and model names on this page are the property of their respective owners. Anand Gears is an independent supplier and panel-builder, not an OEM or authorised distributor of any of the brands listed. Final model availability, lead-time and price are confirmed at the time of quotation. Specifications should be cross-checked against the manufacturer's official datasheet before placing the order.