Is KL only for rail-track equipment?

No. Rail-track maintenance machines are one high-volume pattern. The same KL miter units serve packaging, material handling, and multi-jack screw-jack systems where a compact 90-degree split is required.

What KL sizes are published?

Public copy names the KL family and a KL-75 class example used on rail equipment (compact square housing, flange-mounted variants). A full per-size power and centre-distance ladder is not published here — send body size, ratio, flange PCD in mm, and shaft ends for a budgetary offer.

How do I specify a KL unit?

Send ratio (1:1 miter or the reduction you need), mounting (flange or foot), flange PCD in mm, shaft ends, and duty. A sketch or the old unit is enough for a drop-in replacement.

KL Spiral Bevel Gearboxes

Name: KL Spiral Bevel Gearboxes
Brand: Anand Gears

Anand Gears KL family — 90° spiral bevel and 1:1 miter units with compact square bodies, flange or foot mounting. Gears cut in Bhayander East, Thane.

Anand Gears KL spiral bevel gearbox, compact square housing

KL Family

Spiral Bevel, Named the Anand Gears Way

KL is Anand Gears' spiral bevel gearbox family — not a worm series. Gleason-type spiral teeth turn the drive through 90 degrees in a compact square body. A miter is usually 1:1 (speed unchanged, direction changed). Reduction KL units are built when the machine also needs a ratio. Housings take flange or foot mounting; output plates are drilled to the machine frame when the job needs it.

90° spiral bevel, Gleason-type teeth

1:1 miter for rail, packaging, and jack shafts

Flange or foot mounting; custom output plates

Gears cut in-house in Bhayander East, Thane

Get a budgetary offer All Bevel Gearboxes

Engineering Data

What is published — and what we ask you to send

No invented per-size power or torque columns. Confirm duty at the budgetary-offer stage.

Item	Published fact
Family name	KL (spiral bevel — not worm)
Shafts	90 degrees
Miter	Typically 1:1
Example on site	KL-75 class compact square housing (~84 mm square variants)
Mounting	Flange or foot; custom output plates
Full size ladder	Not published — send body size, ratio, flange PCD in mm

Where It Runs

KL Applications

Rail-track equipment

Recurring 1:1 miter lots with flange plates matched to track-machine frames. See the rail application page for that pattern.

Multi-jack systems

Miter bevels and line shafts keep several screw jacks mechanically in time. Used on synchronized lifting platforms.

Packaging and transfers

Compact 90° turn where a worm box is the wrong geometry and a helical in-line will not fit the frame.

Replacement of imported miters

Send the old unit or a sketch in mm. Gears are cut here, so a worn bevel set can be remade without importing a complete box.

FAQ

KL series — questions we get

What is a KL gearbox?

KL is Anand Gears' spiral bevel family. A miter is usually 1:1 at 90 degrees. It is not a worm gearbox.

Is KL only for rail?

No. Packaging, material handling, and multi-jack systems use the same family.

Do you publish a full KL kW table?

Not on this page. Send body size, ratio, flange PCD in mm, shaft ends, and duty for a budgetary offer.

Budgetary offer — KL Spiral Bevel Gearboxes

Tell us the duty and we’ll send you a number

Ratio, mounting, flange PCD in mm, and shaft ends are usually enough to start. Our engineers reply on the same working day.

Have a nameplate photo, a drawing, or the old unit in front of you? Send it on WhatsApp — that is the fastest route to a number.

Prefer to talk? +91 98203 83719 or +91 98205 18093.